PLA Brow Lamination Kit
PLA Brow Lamination Kit

PLA Brow Lamination Kit

Regular price$87.59
/

  • Low stock - 7 items left
  • Inventory on the way

The PLA Brow Lamination Kit is here to provide you with everything you need to start offering Brow Lamination for your clients. The kit also offers you the opportunity to try out the PLA line at a lower cost! The 10 Shot pack is good for 20 clients!

Kit Contains:

  • PLA Brow Lamination 10 Shot Pack
  • PLA Lash Lift & Brow Adhesive
  • PLA Lash and Brow Cleanser with a Foam Bottle
  • Tint Dish
  • Spoolie Brushes
  • Y Comb
  • Cling Wrap

Fast Facts:

  • Up to 8 weeks (don’t fry the hair!)
  • Supplies for Brow Lamination
  • Get everything you need to begin offering Brow Lamination, and restock supplies as needed!
  • Additional discounts can not be applied.

Warning: This product is intended for professional use only.

Do not use Brow Lamination for Lash Lift as it is a different formula and will not hold lashes.

MSDS

MSDS |MATERIAL SAFETY DATA SHEET                                   

Section 1 – Chemical Product and Company Identification

MSDS NAME

Lash Lift Step 1 and 2

COMPANY ADDRESS

1285 Financial Blvd

Reno, Nevada


Tel:775-440-1208


Lash Lift Step 1 and 2



Section 2 – Composition and Ingredient Information

 

Section 1 – Chemical Product and Company Identification

MSDS NAME

Lash Lift  Step 3

COMPANY ADDRESS

1285 Financial Blvd

Reno, Nevada


Tel:775-440-1208


Lash Lift  Step 3



Section 2 – Composition and Ingredient Information


Ingredient Component Name

Aqua 7732-18-5

2-Ethylhexyl Palmitate 29806-73-3

Styrene/Isoprene Copolymer 25038-32-8

Vitamin E 2074-53-5

Avocado oil 8024-32-6

Keratin 68238-35-7

Phenoxyethanol 122-99-6

Cetearyl Alcohol 67762-27-0

Glycerol Monostearate 31566-31-1














Section 3 – Hazards Identification   


Hazard Risk Classification


N/A




Eye: Rinse cautiously with water for several minutes and obtain medical advice


Skin:  No expected adverse effects, if there is discomfort, wash with water, seek medical attention


Inhalation: No harm from vapors appear at normal working temperature. If a reaction to odours occur move client to inhale fresh air and consult a doctor immediately


Ingestion: Rinse mouth with water and obtain medical advice or consult with poison control. do not induce vomiting. Never give anything by mouth to an unconscious person






Section 4 – First Aid Measures


Inhalation

No harm from vapors appear at normal working temperature. If a reaction to odours occur move client to inhale fresh air and consult a doctor immediately


Eye Contact

Rinse cautiously with water for several minutes and obtain medical advice


Skin Contact

Immediately wash with water and soap and rinse thoroughly.


Ingestion

Consult a doctor immediately.







Section 5 – Fire Fighting Measures


Specific Hazard

N/A

Flash Point

N/A


Auto Ignition temperature

N/A

Flammable/Explosive Limits-lower%

N/A


Flammable/Explosive Limits-upper%

N/A


Hazardous Decomposition Materials

N/A


Suitable Extinguishing Media

Dry powder, chemical foam, carbon dioxide, Water mist


Protective Equipment

Wear a self-contained respiratory protective device. 


Hazardous combustion products

N/A


Unusual fire or explosion hazard

N/A

 

Section 6 – Accidental Release Measures


Environmental precautions

Do not empty into drains. If the product contaminated lakes, rivers or sewages, inform appropriate authorities in accordance with local regulations


Disposal and Clean Up

Remove by liquid absorbing material. Adhered or collected material should be promptly disposed of.


Personal Precautions

Protective equipment and emergency procedures Ensure adequate ventilation








Section 7 – Handling and Storage


Handling Precautions

Keep away from heat and fire.

Keep indoor ventilation or local exhaust device

Avoid sun exposure



Storage

Store in cool, dry, well-ventilated place. Keep containers secretly closed when not in use. Keep in cool, do not store with incompatible material

Section 8 – Exposure Controls and Personal Protection

Engineering Controls

Provide adequate ventilation. Where reasonably practicable, this should be achieved by the use of local exhaust ventilation and good general extraction. If these are not sufficient to maintain concentrations of particulates and solven vapour below the OEL, suitable respiratory protection must be worn


Respiratory Protection

No special protection is required under normal conditions. Wear a filter mask when necessary


Skin Protection


No special protection is required under normal conditions. Wear protective glasses when necessary



Eye/Face protection

Do not get into eyes. No special protection is required under normal condition











Section 9 – Physical and Chemical Properties


Physical State

Lotion

Odour

Slight

pH

6-7

Specific Gravity

N/A

Boiling Point

N/A

Flash Point

N/A

Flammability

N/A

Evaporation Rate(Ether=1)

N/A

Ignition Temperature

NA

Melting/Freezing Point

N/A

Solubility

Partially soluble in water

Vapour Density

N/A

Vapour Pressure

N/A

Volatile Organic Compound(EPA Method24)

N/A


Section 10 – Stability and Reactivity


Stability

Stable under recommended storage conditions


Conditions to Avoid

High Temperature


Incompatible Materials

Strong oxide, acid and alkali



Hazardous Polymerization

N/A


Hazardous decomposition










NA


Section 11– Toxicological Information

Acute toxicity: No information found.
Skin Corrosion/irritation: No information found.
Serious Eye Damage/irritation: No information found. Respiratory or skin sensitisation: No information found. Germ Cell Mutagenicity: No information found.
Carcinogenicity:No information found.
Reproductive toxicity: No information found.

STOT-single exposure: No information found.
STOT-repeated exposure: No information found.
Aspiration hazard:No information found. 


Section 12– Ecological Information


Ecotoxicity

N/A

Persistence/Degradability

No data available

Bioaccumulative Potential

No data available

Mobility in Soil

No data available



 

Section 13– Disposal Consideration

WASTE DISPOSAL:

Dispose of in accordance with local regulations. This material is not considered hazardous waste

HAZARDOUS WASTE NUMBERS: N/A


Section 14– Transport

IMDG,ICAO/IATA,ADR/RID 14.1 UN NO.: Not classified 

IMDG,ICAO/IATA,ADR/RID 14.2 Class: Not classified I

MDG,ICAO/IATA,ADR/RID 14.3 Packaging group: Not classified

 IMDG,ICAO/IATA,ADR/RID 14.4 Technical name: Not classified 

IMDG,ICAO/IATA,ADR/RID 14.5 Label: Not classified

14.6 Attention Notes: Gentle with, prevent collision drag and dump.Prohibition with antioxidant and chemical mixed stowage,transit should prevent sunrain and high temperature. 

Section 15– Regulatory Information


Hazardous Chemical Catalog 

International Maritime Dangerous Goods code

Dangerous Good Number of United nations

Technical instructions for the Safe Transport of Dangerous good by air

Classification and code of danger goods

Occupational Safety and Health Act (OSHA)

The principle of classification of Transport Packaging Groups of Dangerous goods

Globally Harmonized system of classification and labeling of chemical in accordance with local laws


Section 16– Other Information


DISCLAIMER:

All the information in the Material Safety Data Sheet is provided on the basis in good faith, and is believed to be trustworthy but is for reference only. Tong Shen cannot accept any liability for the results whatsoever arising from the use of Tong Shen’s products due that the utilization of these products is simply out of Tong Shen’s control. The users are responsible for selecting the suitability of the products and methods of use.


Step 1 Ingredient Component Name

Aqua 7732-185

Thioglycolic acid 68-11-1

Ethanolamine 141-43-5

Cetearyl Alcohol 67762-27-0/8005-44-5

Sodium Coceth-30 Sulfate 68891-38-3

Dimethyl Benzyl Carbinol 100-86-7

Ammonium Hydroxide 1336-21-6


Step 2 Ingredient Component Name

Aqua 7732-18-5

Cetearyl Alcohol 67762-27-0/8005-44-5

Hydrogen peroxide 7722-84-1

Sodium Phosphate dibasic Dodecahydrate 10039-32-4

Sodium Stannate 12058-66-1

Dimethyl Benzyl Carbinol 100-86-7


Section 1 – Chemical Product and Company Identification

MSDS NAME

Lash Lift  Step 3

COMPANY ADDRESS

1285 Financial Blvd

Reno, Nevada


Tel:775-440-1208


Lash Lift  Step 3



Section 2 – Composition and Ingredient Information


Ingredient Component Name

Aqua 7732-18-5

2-Ethylhexyl Palmitate 29806-73-3

Styrene/Isoprene Copolymer 25038-32-8

Vitamin E 2074-53-5

Avocado oil 8024-32-6

Keratin 68238-35-7

Phenoxyethanol 122-99-6

Cetearyl Alcohol 67762-27-0

Glycerol Monostearate 31566-31-1














Section 3 – Hazards Identification   


Hazard Risk Classification


N/A




Eye: Rinse cautiously with water for several minutes and obtain medical advice


Skin:  No expected adverse effects, if there is discomfort, wash with water, seek medical attention


Inhalation: No harm from vapors appear at normal working temperature. If a reaction to odours occur move client to inhale fresh air and consult a doctor immediately


Ingestion: Rinse mouth with water and obtain medical advice or consult with poison control. do not induce vomiting. Never give anything by mouth to an unconscious person






Section 4 – First Aid Measures


Inhalation

No harm from vapors appear at normal working temperature. If a reaction to odours occur move client to inhale fresh air and consult a doctor immediately


Eye Contact

Rinse cautiously with water for several minutes and obtain medical advice


Skin Contact

Immediately wash with water and soap and rinse thoroughly.


Ingestion

Consult a doctor immediately.







Section 5 – Fire Fighting Measures


Specific Hazard

N/A

Flash Point

N/A


Auto Ignition temperature

N/A

Flammable/Explosive Limits-lower%

N/A


Flammable/Explosive Limits-upper%

N/A


Hazardous Decomposition Materials

N/A


Suitable Extinguishing Media

Dry powder, chemical foam, carbon dioxide, Water mist


Protective Equipment

Wear a self-contained respiratory protective device. 


Hazardous combustion products

N/A


Unusual fire or explosion hazard

N/A

 

Section 6 – Accidental Release Measures


Environmental precautions

Do not empty into drains. If the product contaminated lakes, rivers or sewages, inform appropriate authorities in accordance with local regulations


Disposal and Clean Up

Remove by liquid absorbing material. Adhered or collected material should be promptly disposed of.


Personal Precautions

Protective equipment and emergency procedures Ensure adequate ventilation








Section 7 – Handling and Storage


Handling Precautions

Keep away from heat and fire.

Keep indoor ventilation or local exhaust device

Avoid sun exposure



Storage

Store in cool, dry, well-ventilated place. Keep containers secretly closed when not in use. Keep in cool, do not store with incompatible material

Section 8 – Exposure Controls and Personal Protection

Engineering Controls

Provide adequate ventilation. Where reasonably practicable, this should be achieved by the use of local exhaust ventilation and good general extraction. If these are not sufficient to maintain concentrations of particulates and solven vapour below the OEL, suitable respiratory protection must be worn


Respiratory Protection

No special protection is required under normal conditions. Wear a filter mask when necessary


Skin Protection


No special protection is required under normal conditions. Wear protective glasses when necessary



Eye/Face protection

Do not get into eyes. No special protection is required under normal condition











Section 9 – Physical and Chemical Properties


Physical State

Lotion

Odour

Slight

pH

6-7

Specific Gravity

N/A

Boiling Point

N/A

Flash Point

N/A

Flammability

N/A

Evaporation Rate(Ether=1)

N/A

Ignition Temperature

NA

Melting/Freezing Point

N/A

Solubility

Partially soluble in water

Vapour Density

N/A

Vapour Pressure

N/A

Volatile Organic Compound(EPA Method24)

N/A


Section 10 – Stability and Reactivity


Stability

Stable under recommended storage conditions


Conditions to Avoid

High Temperature


Incompatible Materials

Strong oxide, acid and alkali



Hazardous Polymerization

N/A


Hazardous decomposition










NA


Section 11– Toxicological Information

Acute toxicity: No information found.
Skin Corrosion/irritation: No information found.
Serious Eye Damage/irritation: No information found. Respiratory or skin sensitisation: No information found. Germ Cell Mutagenicity: No information found.
Carcinogenicity:No information found.
Reproductive toxicity: No information found.

STOT-single exposure: No information found.
STOT-repeated exposure: No information found.
Aspiration hazard:No information found. 


Section 12– Ecological Information


Ecotoxicity

N/A

Persistence/Degradability

No data available

Bioaccumulative Potential

No data available

Mobility in Soil

No data available



 

Section 13– Disposal Consideration

WASTE DISPOSAL:

Dispose of in accordance with local regulations. This material is not considered hazardous waste

HAZARDOUS WASTE NUMBERS: N/A


Section 14– Transport

IMDG,ICAO/IATA,ADR/RID 14.1 UN NO.: Not classified 

IMDG,ICAO/IATA,ADR/RID 14.2 Class: Not classified I

MDG,ICAO/IATA,ADR/RID 14.3 Packaging group: Not classified

 IMDG,ICAO/IATA,ADR/RID 14.4 Technical name: Not classified 

IMDG,ICAO/IATA,ADR/RID 14.5 Label: Not classified

14.6 Attention Notes: Gentle with, prevent collision drag and dump.Prohibition with antioxidant and chemical mixed stowage,transit should prevent sunrain and high temperature. 

Section 15– Regulatory Information


Hazardous Chemical Catalog 

International Maritime Dangerous Goods code

Dangerous Good Number of United nations

Technical instructions for the Safe Transport of Dangerous good by air

Classification and code of danger goods

Occupational Safety and Health Act (OSHA)

The principle of classification of Transport Packaging Groups of Dangerous goods

Globally Harmonized system of classification and labeling of chemical in accordance with local laws


Section 16– Other Information


DISCLAIMER:

All the information in the Material Safety Data Sheet is provided on the basis in good faith, and is believed to be trustworthy but is for reference only. PLA cannot accept any liability for the results whatsoever arising from the use of PLA’s products due that the utilization of these products is simply out of PLA’s control. The users are responsible for selecting the suitability of the products and methods of use.




Recently viewed