Lash Adhesive from Paris Lash Academy: Matrix (5mL). Front view of box
Lash Adhesive from Paris Lash Academy: Matrix (5mL). Front view of box , Front view of adhesive bottle
Lash Adhesive from Paris Lash Academy: Matrix (5mL). Front view of adhesive bottle
Lash Adhesive from Paris Lash Academy: Chart of adhesive curing times based on humidity and room temperature

Matrix Adhesive

Regular price$35.00

  • In stock, ready to ship
  • Inventory on the way

The PLA Matrix Adhesive is great for all lash artists. Matrix ideal humidity is 40%, but has a great range for higher humidities up to 70%. The formulation of the adhesive includes ingredients that extends the adhesive, allowing the drop to last longer during appointments.

PLA’s Matrix Adhesive has a treated bottle, allowing no fumes to be emitted. This increases the shelf life and leaves a safer adhesive for both lash artists and their clients.

Each bottle has been batch tested for safety by an independent toxicologist in the UK for grades to meet EU cosmetic regulations. We test each batch to ensure consistency and performance are maintained. Blended and packaged for Paris Lash Academy in the UK.

Matrix is a great option for everyone!

Fast Facts:

  • 5 mL bottle
  • UK and EU registered compliant
  • Low fume
  • Strength: Approximately 6-7 weeks
  • Stable for up to 3 months opened
  • Viscosity: Thin
  • Drying Time: under 1 second
  • Humidity: 20%-75% humidity
  • Color: Black
  • Bottles are pre-punctured.
  • All PLA Adhesives are cruelty free and never tested on animals.
  • Blended and packaged for Paris Lash Academy in the UK

Suggested Environment

  • Ideal Temperature: 68-75 °F / 20-24 °C
  • Optimal humidity is 40%-70%
  • Higher humidity = quicker cure
  • Lower humidity = slower cure


  • Ethyl-2-Cyanoacrylate, Trimethylolpropane triacrylate, Hydroquinone, Carbon Black
  • No Animal Ingredients
  • 100% Vegan
  • Cruelty-Free
  • Latex Free


  • Please store in cool, dark container or in our adhesive container with silica gel, out of UV light. Do not freeze.
  • Unopened adhesive is good for 1 year.
  • Once opened, adhesive is good for up to 3 months under proper storage conditions.
  • Shake for two minutes before using.

Warning: this product is intended for professional use only. Do not use this adhesive for self application or to apply cluster or strip lashes.

Liquid products, including adhesive, cannot be returned. If you are unhappy with your adhesive contact our customer service via email at


MSDS |MATERIAL SAFETY DATA SHEET                                  

Section 1 – Chemical Product and Company Identification


Matrix Adhesive


1285 Financial Blvd

Reno, Nevada



Adhesive glue for applying




Section 2 – Composition and Ingredient Information


Ingredient Component Name

Ethyl-2-Cyanoacrylate                     CAS No: 7085-85-0          50-100%

Trimethylolpropane triacrylate         CAS No: 15625-89-5             <0.9%

Hydroquinone                                CAS No: 123-31-9               <0.1%

Carbon Black                                 CAS No: 1333-86-4             0.1-1%



Section 3 – Hazards Identification  


Hazard Risk Classification


Classification of the ingredients according to (EC) No. 1272/2008 (CLP): 

CAS No: 7085-85-0: Skin irrit. 2, H315, Eye irrit. 2, H319, STOT SE 3, H33

CAS No: 15625-89-5: Skin irrit. 2, H315, Skin sens. 1 H317, Eye irrit. 2, H319

CAS No: 123-31-9: Muta. 2, H341; Carc. 2, H351; Eye Dam. 1, H318;  Aquatic Acute 1, H400;  Acute Tox. 4, H302; Skin Sens. 1, H317




Eye: Irritating to eyes. Liquid or high vapor concentration can cause pain and irritation with slight corneal injury possible


Skin:  Prolonged or repeated skin contact can cause irritation and dermatitis through defatting of skin. Prolonged contact can result in skin absorption


Inhalation: May cause respiratory tract irritation.


Ingestion: Can cause burning of nose and throat.






Section 4 – First Aid Measures



Supply fresh air; consult doctor in case of complaints.


Eye Contact

Rinse opened eye for several minutes under running water.


Skin Contact

Immediately wash with water and soap and rinse thoroughly.



Consult a doctor immediately.




Section 5 – Fire Fighting Measures


Specific Hazard


Flash Point



Auto Ignition temperature


Flammable/Explosive Limits-lower%



Flammable/Explosive Limits-upper%



Hazardous Decomposition Materials



Suitable Extinguishing Media

Carbon dioxide, sand. DO NOT USE WATER.


Protective Equipment

Wear self-contained respiratory protective device.


Hazardous combustion products



Unusual fire or explosion hazard



Section 6 – Accidental Release Measures


Environmental precautions

Do not allow product to reach sewage system or any water course.


Disposal and Clean Up

Allow to solidify. Pick up mechanically. 
Ensure adequate ventilation


Personal Precautions

Protective equipment and emergency procedures Ensure adequate ventilation




Section 7 – Handling and Storage


Handling Precautions

Store in a cool, dry place in tightly closed receptacles. Keep away from heat and direct sunlight.
Ensure good ventilation/exhaustion at the workplace. 
No special measures required about fire and explosion protection.




Store in a cool location. Store only in the original receptacle. Store away from oxidising agents.Keep container tightly sealed.

Section 8 – Exposure Controls and Personal Protection

Engineering Controls

The usual precautionary measures are to be adhered to when handling chemicals. Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing
Avoid contact with the eyes and skin


Respiratory Protection

Not necessary if room is well-ventilated.
Use suitable respiratory protective device in case of insufficient ventilation.


Skin Protection

The glove material has to be impermeable and resistant to the product/ the substance/ the preparation. Selection of the glove material on consideration of the penetration times, rates of diffusion and the degradation. The selection of the suitable gloves does not only depend on the material, but also on further marks of quality and varies from manufacturer to manufacturer.  For penetration time, the exact break through time has to be found out by the manufacturer of the protective gloves and has to be observed. 
Rubber Gloves and PVC gloves are not suitable.



Eye/Face protection

Face shield and safety glasses Use equipment for eye protection tested and approved under appropriate government standards.




Section 9 – Physical and Chemical Properties


Physical State






Specific Gravity


Boiling Point


Flash Point




Evaporation Rate(Ether=1)


Ignition Temperature


Melting/Freezing Point




Vapour Density


Vapour Pressure


Volatile Organic Compound(EPA Method24)



Section 10 – Stability and Reactivity



Stable under recommended storage conditions


Conditions to Avoid

Avoid exposure to exothermic polymerisation. 
Reacts with alcohols.
 Reacts with alcohols, amines, aqueous acids and alkalis. Reacts with water and acids.
 Reacts with amines. 
Reacts with water.
Reacts with alkali (lyes).



Incompatible Materials




Hazardous Polymerization



Hazardous decomposition

No decomposition if used according to specifications.

Section 11– Toxicological Information

Primary routes of entry: Inhalation (Yes), skin (Yes), Ingestion (Yes)

Effects of overexposure: On the skin: Irritant to skin and mucous membranes. 
On the eye: Irritating effect. Sensitisation: Sensitisation possible through skin contact. The product shows the following dangers:
Irritant / May cause an allergic skin reaction / Skin Sensitivity.

Ethyl cyanoacrylate: LD50  Oral at >5000mg/Kg (CICAD (2001))

Ethyl cyanoacrylate: LD50 Dermal >2000mg/Kg (CICAD (2001))

Trimethylolpropane triacrylate: LD50 Oral >5000mg/Kg

Hydroquinone: Oral LD50 : 593mg/kg (Acute)



Section 12– Ecological Information



Do not allow undiluted product or large quantities of it to reach ground water, water course or sewage system.


No data available

Bioaccumulative Potential

No data available

Mobility in Soil

No data available


Section 13– Disposal Consideration



Must not be disposed together with household garbage. Do not allow product to reach sewage system.



Section 14– Transport





 UN/NA: Void                                           


MARINE POLLUTANT NONE                                                   




UN/NA: Void





Section 15– Regulatory Information

This safety data sheet complies with the regulatory requirement


Section 16– Other Information



All the information in the Material Safety Data Sheet is provided on the basis in good faith, and is believed to be trustworthy but is for reference only. Tong Shen cannot accept any liability for the results whatsoever arising from the use of Tong Shen’s products due that the utilization of these products is simply out of Tong Shen’s control. The users are responsible for selecting the suitability of the products and methods of use.


Canceling a Subscription: To cancel your subscription, please contact us at  with a minimum of 24 hours notice prior to your next billing date. This will allow us to process your cancellation request asap and ensure that it is applied to the next billing cycle.Please note that canceling a subscription does not cancel an order that has already been confirmed or stop a pending charge. If you have any questions or concerns about your subscription, please reach out to us at .

Updating Shipping Addresses: To update the shipping address for a future subscription shipment, please contact us at  with a minimum of 24 hours notice before your next billing date. This will give us enough time to process your request and ensure that your order is delivered to the correct address.Please note that subscription orders that have already been confirmed with an order number cannot be edited. If you have any questions or concerns about updating your shipping address, please reach out to us at .

Updating Payment Methods: To update the payment method for your subscription, please email us at . We will provide you with a secure link to update your payment information.Please note that subscription orders that have already been confirmed with an order number cannot have payment changes. If you have any questions or concerns about updating your payment method, our customer service team is available to assist you.

Subscription Return Policy: Due to the nature of our adhesives, we are unable to accept returns or exchanges. However, if you are not satisfied with your adhesive, please contact us at .


You may also like

Recently viewed